DTC P0010 & DTC P0020: Notes

Code Definition

DTC P0010: Camshaft Position "A" Actuator Circuit (Bank 1)
DTC P0020: Camshaft Position "A" Actuator Circuit (Bank 2)

CAUTION: If ECM replacement is instructed in following testing, always ensure ECM harness connector and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. If ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - LEXUS article in GENERAL INFORMATION.