lemon-mirror:
Home >> Lexus >> 2003 >> GS 300 >> Repair and Diagnosis >> Electrical >> Gauges >> Compass >> Pre-Check >> 6. Selecting Display Mode

6. Selecting Display Mode

  1. Turn the ignition switch ON.
  2. Check that the LED on the inner mirror is lit (green).
  3. Check that the compass display indicates an azimuthal direction (N, NE, E, SE, S, SW, W, or NW) or "C".
  4. Pressing the mode select switch on the inner mirror for 3 sec. or more erases the above mentioned display and activates the Non-display mode.

HINT:

Immediately after pressing the mode select switch, the LED goes off activating the Non-glare-proof mode. However, when the switch remains pressed, the LED is lit again after 3 sec. and the system enters the automatic glare-proof mode.

· About lemon-mirror