lemon-mirror:
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition >> Ignition Coil >> Removal

Ignition Coil: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  3. REMOVE ENGINE ROOM SIDE COVER LH  (See REMOVAL )
  4. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL )
  5. REMOVE FRONT SUSPENSION UPPER CENTER BRACE  (See REMOVAL )
  6. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  7. DRAIN ENGINE COOLANT  (See COOLANT )
  8. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  (See ON-VEHICLE INSPECTION )
  9. REMOVE INTAKE AIR SURGE TANK ASSEMBLY  (See REMOVAL )
  10. REMOVE NO. 1 SURGE TANK STAY 
    1. Remove the bolt and disconnect the harness clamp.
      Fig 1: Locating Bolt And Harness Clamp
      G04975497Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and No. 1 surge tank stay.
      Fig 2: Locating Bolt And No. 1 Surge Tank Stay
      G04975498Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE IGNITION COIL ASSEMBLY 
    1. Disconnect the 6 ignition coil connectors.
    2. Remove the 6 bolts and 6 ignition coils.
      Fig 3: Locating Ignition Coils And Bolts
      G04975500Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror