lemon-mirror:
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Accelerator Pedal Rod >> Removal

Accelerator Pedal Rod: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE ACCELERATOR PEDAL ROD 
    1. Disconnect the sensor connector.
    2. Remove the 2 bolts and pedal rod.
      NOTE:
      • Do not drop or strike the accelerator pedal.
      • Do not disassemble the accelerator pedal.
        Fig 1: Locating Accelerator Pedal Rod With Bolts
        G05291627Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror