lemon-mirror:
Home >> Lincoln >> 1995 >> Mark VIII Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests 4.6L >> Introduction >> Variable Induction Systems >> Intake Air Control Solenoid

Intake Air Control Solenoid

With engine off, wait 10 seconds, and then disconnect Intake Air Control (IAC) solenoid. Solenoid is mounted on firewall side of intake plenum. Using an ohmmeter on 200-ohm scale, check resistance between IAC solenoid terminals. Resistance should be 50-100 ohms. If resistance is not as specified, replace solenoid.

· About lemon-mirror