lemon-mirror:
Home >> Mazda >> 1989 >> RX-7 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> System/Component Tests >> Fuel System >> Fuel Delivery >> Injector Fuel Leakage

Injector Fuel Leakage

  1. Remove dynamic chamber, if necessary. Loosen delivery pipe attaching bolts. Remove delivery pipe. Using wire, secure injectors tightly onto delivery pipe.
    CAUTION: Ensure injectors are securely tied to delivery pipe. If not properly secured, fuel may spray from loose connections.
  2. Install jumper wire between 2 terminals of fuel pump test circuit connector. See BASIC TESTING for test connector location. Turn ignition on. Check that no fuel leakage exists at injectors. After 5 minutes, only a slight amount of fuel leakage is acceptable.
· About lemon-mirror