Ignition Control Module
Check ignition coil, ECM/PCM and high-tension lead connections. Check secondary coil winding and high-tension lead resistance. Measure voltage between ground and appropriate ECM/PCM terminals. See ECM/PCM TERMINAL IDENTIFICATION table. If all measurements are within specification, and misfire still occurs, replace distributor or ignition coil.
ECM/PCM TERMINAL IDENTIFICATION
| ECM/PCM Wire Color (1) | Closed Throttle Volts | WOT Volts | ||
|---|---|---|---|---|
| Pink/Black (4G) | 0 Or 5 | 2.5 | ||
| Light Green/Red (4N) | 0 | .5 | ||
|
||||