lemon-mirror:
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> Crankshaft Position (CKP) Sensor Inspection >> Resistance Inspection

Resistance Inspection

  1. Disconnect the CKP sensor connector.
  2. Measure the resistance between CKP sensor terminals A and B using an ohmmeter.
    • If not as specified, replace the CKP sensor.
    • If CKP sensor resistance is okay, but PID value or PCM terminals 21 and 22 voltages are out of specification, perform the "Circuit Open/Short Inspection".

      Specification 

      267-325 ohms 

· About lemon-mirror