lemon-mirror:
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Crankshaft Position (CKP) Sensor Inspection >> Resistance Inspection

Resistance Inspection

  1. Disconnect the CKP sensor connector.
  2. Measure the resistance between CKP sensor terminals A and B using an ohmmeter.
    • If not as specified, replace the CKP sensor.
    • If CKP sensor resistance is okay, but PID value or PCM terminals 1 and 27 voltages are out of specification, perform the CIRCUIT OPEN/SHORT INSPECTION .

    Specification 

    1. 267-325 ohms 
· About lemon-mirror