Generator Internal Parts: Rotor

Measure the resistance between the slip rings using a ohmmeter.

Courtesy of MAZDA MOTORS CORP.
- If not within specification, replace the rotor.
Generator rotor resistance (between slip rings) [20°C {68°F}] 1.9-2.2 ohms
Verify that there is no continuity between the slip ring and core using a ohmmeter.

Courtesy of MAZDA MOTORS CORP.
- If there is continuity, replace the rotor.
Inspect the slip ring surface condition.
- If the slip ring surface is rough, use a lathe or fine sandpaper to make it smooth.