lemon-mirror:
Home >> Mazda >> 2021 >> CX-5 Signature >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery Recharging >> Without Using GR8-1291:

Without Using GR8-1291:

WARNING:
  • Keep all flames away from the battery, otherwise evaporated gas from the battery fluid may catch fire and cause serious injury.
  • Remove the battery filler caps when recharging to prevent battery deformation or damage.
CAUTION:
  • Do not quick charge for more than 30 min. Otherwise, it will damage the battery.
  1. Remove the battery and then place it in a pan of water. (See BATTERY REMOVAL/INSTALLATION [VIN M] .) (See BATTERY REMOVAL/INSTALLATION [VIN Y] .)
    G13113004Courtesy of MAZDA MOTORS CORP.
  2. Remove the battery filler caps.
  3. Connect a battery charger to the battery and adjust the charging current as follows.

    Battery slow charge current 

    55D23L (60A-h/20HR): 4.5-5.5 A

    75D23L (65A.h/20HR): 5.0-6.0 A

    80D26L (65A.h/20HR): 5.5-6.5 A

    95D31L (80A.h/20HR): 6.5-8.0 A

    Battery quick charge current [30 min] 

    55D23L (60A.h/20HR): 30 A

    75D23L (65A.h/20HR): 35 A

    80D26L (65A.h/20HR): 35 A

    95D31L (80A.h/20HR): 40 A

  4. After the battery is recharged, verify that the voltage is within the specification and remains at the same value for 1 h or more after the recharging has been completed.
    • If not within specification, replace the battery.

Standard voltage 

12. 4 V or more