Resistance Inspection
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
- Disconnect the fuel injector connector. (See FUEL INJECTOR REMOVAL/INSTALLATION .)
- Inspect the resistance between fuel injector terminals A and B.
Fuel injector resistance
1.6-2.52 ohms [Surrounding temperature: 0-80°C {32-176°F}]
- If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION .)