Charging System
- Battery Inspection
- Battery Recharging
- Remove Capsule Cover
- Remove Cover Assembly (Driver's Side)
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Cowl Grille (Right Side)
- Disconnect Positive Lead-Acid Battery Terminal
- Remove Lead-Acid Battery
- Charge Lead-Acid Battery
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Battery Removal/Installation
- D-code
- Remove Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Passenger's Side Front Fender Molding
- Remove Cowl Grille (Right Side)
- Remove Lead-Acid Battery
- Remove Battery Tray
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Charging System Location Index [H3T]
- Charging System Location Index [PYUL]
- Dc-Dc Converter Inspection [PYUL]
- Dc-Dc Converter Removal/Installation [PYUL]
- Notes
- High Voltage Part Inspection And Removal/Installation Notes
- Open Capsule Cover
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove 150 W Power Supply Unit
- Remove Service Hole Cover (High Voltage Battery)
- Remove Service Plug
- Remove Front Under Cover No. 3
- Remove Floor Under Cover (Left side)
- Remove Rear Under Cover No. 1 (Left Side)
- Remove Terminal Cover (High Voltage Battery Side)
- Perform High Voltage Handling
- Remove Cooling System Cap (Sub) (PYUL)
- Remove Front Under Cover No. 2
- Remove Front Under Cover No. 1
- Drain EV System Coolant
- Remove DC-DC Converter Cover
- Install in Reverse Order of Removal
- Perform Configuration (If Parts Are Replaced)
- Add Coolant (Sub) [PYUL] (With e-SKYACTIV PHEV)
- Install cooling system cap (sub)
- Bleed Coolant (Sub) Air (With e-SKYACTIV PHEV)
- Inspect For PHEV Coolant Leakage
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Negative Battery Terminal Disconnection/Connection
- Sub Battery Inspection
- Sub Battery Recharging
- Sub Battery Removal/Installation
- Sub Battery Removal/Installation [001]
- D-code
- Perform Viewing Information Verification
- Remove Front Seat Head Restraint
- Remove Passenger Side Front Seat Installation Bolts
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Front Seat Belt Cover (power seat)
- Remove front seat (power seat)
- Remove Passenger Side Front Scuff Plate
- Remove Front Side Trim (Right Side)
- Remove Driver Side Side Wall
- Remove Foot Support
- Remove Control Unit Cover
- Remove the sub-battery cap
- Remove Sub Battery Terminal
- Remove Sub-Battery Fuse
- Remove the sub-battery clamp
- Remove Sub Battery
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Sub Battery Removal/Installation [002]
- D-code
- Perform Viewing Information Verification
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Front Seat Head Restraint
- Remove the recliner lever knob (manual seat)
- Remove Front Seat Belt Cover (manual seat)
- Remove front seats (manual seats)
- Remove Passenger Side Front Scuff Plate
- Remove Front Side Trim (Right Side)
- Remove Driver Side Side Wall
- Remove Foot Support
- Remove Control Unit Cover
- Remove the sub-battery cap
- Remove Sub Battery Terminal
- Remove Sub-Battery Fuse
- Remove the sub-battery clamp
- Remove Sub Battery
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function