DI ENGINE 120 (description only)
DI Engine 120
| DTC | Description Only - No Test Available |
|---|---|
| 1 | No fault in system |
| 10 | Not used |
| 11 | Left or right reference resistor(DI) (R16/3 or R16/4) defective |
| 12 | TN engine speed signal is outside the tolerance range |
| 13 | Not used |
| 14 | Not used |
| 15 | Ignition coil output from left or right ignition control module (N1/4 or N1/5) defective or primary winding of ignition coil has open circuit |
| 16 | Not used |
| 17 | Left or right crankshaft position sensor (L5/4 or L5/5) defective |
| 18 | Not used |
| 19 | Ground, coding from left ignition control module (N1/4) not present |
| 2 | Maximum retard setting on at least one cylinder has been reached. |
| 20 | Left or right ignition control module (N1/4 or N1/5) DTC memory defective |
| 21 | Load sensor in left or right ignition control module (N1/4 or N1/5) defective (recognized with engine running) |
| 22 | Not used |
| 23 | Not used |
| 24 | Not used |
| 25 | Not used |
| 26 | Left or right ignition control module (N1/4 or N1/5) data exchange malfunction |
| 27 | Left or right LH-SFI control module (N3/2 or N3/3) data exchange malfunction |
| 28 | EA/CC/ISC control module(N4/1) data exchange malfunction |
| 29 | Not used |
| 3 | Not used |
| 30 | Not used |
| 31 | Not used |
| 32 | Not used |
| 33 | Not used |
| 34 | Ignition misfire, cylinder7 (left cylinder bank) or 1 (right cylinder bank) |
| 35 | Ignition misfire, cylinder11 (left cylinder bank) or 5 (right cylinder bank) |
| 36 | Ignition misfire, cylinder9 (left cylinder bank) or 3 (right cylinder bank) |
| 37 | Ignition misfire, cylinder12 (left cylinder bank) or 6 (right cylinder bank) |
| 38 | Ignition misfire, cylinder8 (left cylinder bank) or 2 (right cylinder bank) |
| 39 | Ignition misfire, cylinder10 (left cylinder bank) or 4 (right cylinder bank) |
| 4 | Load sensor in ignition control module (N1/4 or N1/5) defective. |
| 40 | Not used |
| 41 | Not used |
| 5 | Knock sensors (A16) 1 and/or2 defective. |
| 6 | Camshaft position sensor(L5/2 or L5/3) defective |
| 7 | Knock control-output switch in ignition control module (N1/4 or N1/5) defective. |
| 8 | Transmission overload protection switch, brake band B1 (S65) and/or B2 (S65/1) does not close |
| 9 | Transmission overload protection switch, brake band B1 (S65) and/or B2 (S65/1) does not open |