DI ENGINE 119 (description only)
DI Engine 119
| DTC | Description Only - No Test Available | |
|---|---|---|
| 1 | - | No malfunction in system |
| 10 | - | Not used |
| 11 | - | Reference resistor (DI) (R16/2)defective |
| 12 | - | TN-signal (engine RPM output) is outside of tolerance range |
| 13 | - | Not used |
| 14 | - | Not used |
| 15 | - | Ignition coil 1 output from DI control module (N1/3) defective or primary winding of ignition coil has open circuit |
| 16 | 119 only | Ignition coil 2 output from DI control module (N1/3) defective or primary winding of ignition coil has open circuit |
| 17 | - | CKP sensor (L5) defective |
| 18 | 119 only | Magnets for CKP sensor (L5)not recognized |
| 19 | - | Not used |
| 2 | - | Maximum retard setting on at least one cylinder has been reached |
| 20 | - | DI control module (N1/3)DTC memory defective |
| 21 | - | MAP sensor in DI control module (N1/3) defective (recognized with engine running) |
| 22 | - | Not used |
| 23 | - | Not used |
| 24 | - | Not used |
| 25 | - | Not used |
| 26 | - | DI control module (N1/3)data exchange malfunction |
| 27 | - | LH-SFI control module (N3/1)data exchange malfunction |
| 28 | - | EA/CC/ISC control module(N4/1) data exchange malfunction |
| 29 | - | Not used |
| 3 | - | Not used |
| 30 | - | Not used |
| 31 | - | Not used |
| 32 | - | Not used |
| 33 | - | Not used |
| 34 | - | Ignition misfire cylinder1 (engine 104) cyl. 1 (engine 119) |
| 35 | - | Ignition misfire cylinder5 (engine 104) cyl. 5 (engine 119) |
| 36 | - | Ignition misfire cylinder3 (engine 104) cyl. 4 (engine 119) |
| 37 | - | Ignition misfire cylinder6 (engine 104) cyl. 8 (engine 119) |
| 38 | - | Ignition misfire cylinder2 (engine 104) cyl. 6 (engine 119) |
| 39 | - | Ignition misfire cylinder4 (engine 104) cyl. 3 (engine 119) |
| 4 | - | MAP sensor in DI control module (N1/3) defective |
| 40 | 119 only | Ignition misfire cyl. 7 (engine119) |
| 41 | 119 only | Ignition misfire cyl. 2 (engine119) |
| 5 | - | Knock sensor 1 and/or 2 defective |
| 6 | - | CMP sensor (L5/1) defective |
| 7 | - | Knock control-output switch in DI control module (N1/3) defective |
| 8 | - | Transmission overload protection switch (S65) does not close |
| 9 | - | Transmission overload protection switch (S65) does not open |