Wheels, Chassis Alignment Check -- 208 Chassis

• General Information
  • Information on measuring tire tread depth - AH40.10-P-0006-01T
  • Notes on tire flat spots - AH40.10-P-1030-01A
  • General information - AH40.10-P-1050
    • General information on rim / tire conversions - AH40.10-P-1050-01A
    • General information on chassis modifications - AH40.10-P-1050-02A
  • Information on tires / rims - AH40.10-P-9411-01A
• Testing & Repair
  • General information on vehicle level measurement - AR40.00-P-0202A
  • Testing and repair work: Passenger cars: Wheels, chassis alignment check - AR40.00-Z-9208AA
  • Checking condition of rim - AR40.10-P-1010-01A
  • Checking tires for lateral and radial runout - AR40.10-P-1025A
    • Notes
    • Eliminating radial runout - AR40.10-P-1025-01A
  • Replace tires - AR40.10-P-1030A
  • Balance wheels - AR40.10-P-1040A
    • Notes
    • Mounting centering sleeve - AR40.10-P-1040-01A
    • Balancing wheels on vehicles with ETS, ASR or ESP - AR40.10-P-1040-03A
  • Perform chassis alignment check - AR40.20-P-0200A
  • General information on chassis alignment - AR40.20-P-0201A
  • Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230A
  • Checking vehicle level at front and rear axles - AR40.20-P-0300A
    • Notes
    • Adjusting the vehicle level by changing the springs or spring rubber mounts - AR40.20-P-0300-01B
  • Check vehicle level at front and rear axle with electronic inclinometer, adjust if necessary - AR40.20-P-0301A
  • Checking and adjusting reference point for self-leveling suspension - AR40.20-P-0310B
  • Check ball point position - AR40.20-P-0320A
  • Adjusting ball point position - AR40.20-P-0321B
  • Check and adjust camber and caster at front axle - AR40.20-P-0322C
    • Notes
    • Installing repair bolt from when working on springs or spring bosses which are tensioned - AR40.20-P-0322-01B
    • Checking camber, assigning table value - AR40.20-P-0322-02A
    • Checking camber, assigning table value - AR40.20-P-0322-03A
  • Check and adjust front axle toe-in - AR40.20-P-0323C
  • Checking toe-out on turns - AR40.20-P-0325A
  • Checking rear axle camber - AR40.20-P-0331A
  • Check and adjust toe on rear axle - AR40.20-P-0332A
  • Check accidents vehicles and vehicles in which accident damage is suspected - AR40.30-P-0400A
  • Preparations for distance and comparison measurements - AR40.30-P-0401B
    • Notes
    • Adjusting fixtures for distance and comparison measurement according to the model concerned - AR40.30-P-0401-01A
  • Carry out distance and comparison measurements on front and rear axles - AR40.30-P-0402A
    • Notes
    • Carrying out distance and comparison measurements on front axle - AR40.30-P-0402-01B
    • Carry out distance and comparison measurements on rear axle - AR40.30-P-0402-02A
  • Measuring rear axle carrier (when removed) - AR40.30-P-0410A
  • Measuring spring link, camber arm, radius rod, thrust arm and track rod of rear axle - AR40.30-P-0420A
  • Measuring wheel carrier (when removed) - AR40.30-P-0425A
  • Measuring steering knuckle (removed) - AR40.30-P-0451C
• Maintenance
  • Remove/install wheels, rotate if necessary - AP40.10-P-4050Z
  • Check tires for damage and cracks - AP40.10-P-4051Z