Mixture Formation - 257 Chassis 1 Of 2

• General Information
  • Use Of Unleaded Fuels (Premium And Regular) - AH07.00-P-1000-01A
  • Use Of Unleaded Fuels, Super Plus - AH07.00-P-1000-04A
  • General Information On Work On Gasoline Direct Injection System - AH07.00-P-2000-01A
  • General Notes: Passenger Cars: Mixture Formation - AH07.00-Z-9999AZ
  • Notes On Injectors - AH07.16-P-1000-01MRT
• Basic Knowledge
  • Mixture Formation, Basic Function - GF07.00-P-1000A
  • Pressure Sensor Downstream Of Air Filter, Basic Function - GF07.04-P-2003A
  • Crankshaft Hall Sensor, Basic Function - GF07.04-P-2004A
  • Start Quantity Control, Basic Function - GF07.08-P-1052A
  • Combustion Engine Control Unit, Basic Function - GF07.08-P-9890A
  • Starting, Function - GF07.10-P-1001MRT
  • Fuel Supply, Function - GF07.10-P-1003MRT
  • Injection Regulation, Function - GF07.10-P-1004MRT
  • Ignition System Function - GF07.10-P-1005MRT
  • Synchronize Fuel Injection And Firing Order Function - GF07.10-P-1006MRT
  • Start, Post-Start Phase And Warm-Up Enrichment, Function - GF07.10-P-1007MRT
  • RPM Control, Function - GF07.10-P-1008MRT
  • Lambda Control, Function - GF07.10-P-1010MRT
  • Smooth Running Control, Function - GF07.10-P-1011MRT
  • Thermal Management, Function - GF07.10-P-1012MRT
  • Torque Coordination, Function - GF07.10-P-1013MRT
  • Overrun Mode Fuel Shutoff, Function - GF07.10-P-1014MRT
  • Knock Control, Function - GF07.10-P-1015MRT
  • Camshaft Adjustment, Function - GF07.10-P-1016MRT
  • Engine Limp-Home Mode, Function - GF07.10-P-1019MRT
  • European OBD, Function - GF07.10-P-1021MRT
  • Ignition, Function - GF07.10-P-1023MRT
  • Starting, Basic Function - GF07.10-P-1032A
  • Ignition System, Basic Function - GF07.10-P-1035A
  • Upshift Delay, Basic Function - GF07.10-P-1036A
  • Ignition On/Off, Basic Function - GF07.10-P-1039A
  • ECO Start/Stop Function Engine Management, Function - GF07.10-P-1042MRT
  • Knock Control, Basic Function - GF07.10-P-1044A
  • Engine Limp-Home Mode, Basic Function - GF07.10-P-1047A
  • Smooth Running Control, Basic Function - GF07.10-P-1048A
  • Overrun Mode Fuel Shutoff, Basic Function - GF07.10-P-1049A
  • ECO Start/Stop, Basic Function - GF07.10-P-1051A
  • Lambda Control, Basic Function - GF07.10-P-1054A
  • European On-Board Diagnostics, Basic Function - GF07.10-P-1057A
  • Torque Coordination, Basic Function - GF07.10-P-1060A
  • RPM Request, Basic Function - GF07.10-P-1061A
  • Engine Shutoff Point Detection, Basic Function - GF07.10-P-1063B
  • Heat Management, Basic Function - GF07.10-P-9900A
  • Fuel Injection And Ignition System Synchronization, Basic Function - GF07.10-P-9902A
  • Component Description For ME-SFI (ME) Control Unit - GF07.61-P-6000MRT
  • Gasoline Injection And Ignition System With Direct Injection, Function - GF07.70-P-0002MRT
  • Table Of Contents For Function Description Of Gasoline Injection And Ignition System With Direct Injection - GF07.70-P-0998MRT
  • Overview Of System Components For Gasoline Injection And Ignition System With Direct Injection - GF07.70-P-9998MRT
• Safety Precautions
  • Safety Information: Mixture Formation - AS07.00-Z-9999ZZ
  • Risk Of Explosion Caused By Fuel Igniting. Risk Of Injury To Skin And Eyes Caused By Fuel Spraying Out At High Pressure - AS07.16-Z-0001-01A
• Testing & Repair
  • General - AR07.00-P-1000-01A
  • Exhaust Emission Test I - AR07.00-P-1000A
  • Tightening Procedure For Housing Of Fuel System High Pressure Pump - AR07.02-P-1020-02MRT
  • Determine Position Of Cam Of Fuel High-Pressure Pump - AR07.02-P-1020-04MRT
  • Remove/Install High-Pressure Fuel Pump - AR07.02-P-1020MSA
  • Remove/Install Housing Of High-Pressure Fuel Pump - AR07.02-P-1026MSA
  • Remove/Install Drive Gear Of High-Pressure Fuel Pump - AR07.02-P-1027MSA
  • Replace Fuel Injector Sealing Ring - AR07.03-P-0004-01MM
  • Remove/Install Fuel Injectors Sealing Package On Rail - AR07.03-P-0004-02MM
  • Remove Fuel Injection Nozzles - AR07.03-P-0004-03MM
  • Remove/Install High-Pressure Fuel Line To Rail - AR07.03-P-1003MSA
  • Check High-Pressure Fuel Lines - AR07.03-P-1010-03MRT
  • Check Fuel High Pressure Circuit - AR07.03-P-1010-04MM
  • Remove/Install Rail With Fuel Injectors For Cylinders 1, 2, 3 - AR07.03-P-1053MSA
  • Remove/Install Rail With Fuel Injectors For Cylinders 4, 5, 6 - AR07.03-P-1054MSA
  • Check Low-Pressure Fuel Line - AR07.03-P-1120-01MRT
  • Remove/Install Low-Pressure Fuel Line - AR07.03-P-1120MSA
  • Reduce Fuel Pressure Through Service Valve - AR07.03-P-1460-01MSA
  • Relieve Fuel Pressure - AR07.03-P-1460-02MM
  • Remove/Install Oxygen Sensor Downstream Of Catalytic Converter - AR07.04-P-0085MSA
  • Remove/Install Oxygen Sensor Upstream Of Catalytic Converter - AR07.04-P-0086MSA
  • Remove, Install Fuel Pressure And Temperature Sensor - AR07.04-P-0091MSA
  • Remove/Install Pressure Sensor Downstream Of Air Filter - AR07.04-P-0110MSA
  • Remove/Install ME-SFI Control Unit - AR07.08-P-1000MSA
  • Remove/Install Throttle Valve Actuator - AR07.51-P-1404MSA
• Test & Adjustment Values
  • Test And Adjustment Values: Passenger Cars: Mixture Formation - BE07.00-Z-9999AZ
  • Check Values For Fuel High-Pressure Pump - BE07.02-P-1000-03MRT
• Torque Specifications
  • Tightening Torques: Passenger Cars: Mixture Formation - BA07.00-Z-9999AZ