Section 1788 (Engine - Operating Fluids)
WARNING: This page does not describe the selected car, but rather 104 other vehicles, including the 2010 BMW Z4, 2010 BMW X6 M, 2010 BMW X6, 2010 BMW X5 M, and 2010 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- 1.0 General Information
- Notes
- Good Wear Protection and Friction Reduction
- Limited Tendency to Produce Combustion Residue
- Favorable Viscosity Temperature Behavior
- Anti-Foaming
- Good Corrosion Inhibition
- Mixing Ability/Compatibility
- Good Thermal Conductivity/Good Cooling Property
- Good Dispersant/Detergent Qualities
- Oxidation Inhibitors and Aging Stability
- 2.0 Grading Of Oils
- 3.0 Engine Oil Requirements and Specifications
- 4.0 Engine Oil Change Intervals
- 5.0 Condition Based Service
- 6.0 Engine Oil Additives
- 7.0 Break-In Instructions
- 8.0 N52, N52KP and N54 Front and Rear Radial Seal Sealant
- 10.0 Lubricant For Oxygen Sensor
- 11.0 Oil Consumption
- 13.0 Operating Fluids Table and Alternate Suppliers