lemon-mirror:
Home >> Mitsubishi >> 1993 >> Precis Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Diagnosis & Testing >> Control Unit >> Ground Circuits

Ground Circuits

  1. Turn ignition off. Using an ohmmeter, check continuity between chassis ground and ECM ground terminals. See GROUND TERMINAL ID  table. Ohmmeter should indicate zero ohms. If reading is not zero ohms, check and repair open circuit between ECM connector and ground.
  2. Connect voltmeter negative lead to chassis ground. Connect positive lead to ECM ground terminals. See GROUND TERMINAL ID  table. See Figure and Figure . With engine running, voltmeter should indicate less than one volt. If voltmeter reading is greater than one volt, check for open, corrosion or loose connection in ground circuit.
· About lemon-mirror