lemon-mirror:
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Electrical >> Integrated Power Module >> Installation

Integrated Power Module: Installation

  1. Connect the wiring harness connectors to the Power Distribution Center (1) and the Front Control Module (2).
  2. Position the Integrated Power Module (IPM) (1) into the battery tray. Move the IPM down and rearward to engage the locking tabs (2) into the battery tray locating slots (4).
  3. Install the IPM (2) push pin fasteners (1) into the battery tray (4).
  4. Position the battery positive cable (4) and install the nut (5) onto the IPM B+ terminal stud (6). Install the IPM cover.
  5. Connect the battery negative cable.
  6. Confirm proper vehicle operation.
· About lemon-mirror