Work Procedure

1. START 
   1. Turn ignition switch ON.
   2. Check information display of the combination meter.

   Is Distance to Engine Oil Change displayed? 

   YES >>

   GO TO  3.

   NO >>

   GO TO  2.

2. SELECT OIL CONTROL SYSTEM MODE 

   Push the Display next switch and select oil control system mode.

   >>

   GO TO  3.

3. RESET ENGINE OIL DATA 
   1. Press and hold the Display Next switch at least 1 second while Distance to Engine Oil Change is displayed.
   2. Stop pressing the Display Next switch, and a few seconds later, check that the value of Distance to Engine Oil Change is reset.

>>

END