Fuel Pressure Release

1. FUEL PRESSURE RELEASE 

   With M.U.T.-III SE

   1. Turn ignition switch ON.
   2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode of "ENGINE" using M.U.T.-III SE.
   3. Start engine.
   4. After engine stalls, crank it two or three times to release all fuel pressure.
   5. Turn ignition switch OFF.

   Without M.U.T.-III SE

   1. Remove fuel pump fuse located in IPDM E/R.
   2. Start engine.
   3. After engine stalls, crank it two or three times to release all fuel pressure.
   4. Turn ignition switch OFF.
   5. Reinstall fuel pump fuse after servicing fuel system.

>>

END