Neutral/Inhibitor Switch

Check sensor voltage values against values in NEUTRAL/INHIBITOR SWITCH TEST table. Replace sensor if values are not as specified. Also see appropriate NEUTRAL/INHIBITOR SWITCH, NEUTRAL SWITCH & A/T CONTROL or NEUTRAL/INHIBITOR SWITCH & RELAY diagnostic chart.

NEUTRAL/INHIBITOR SWITCH TEST ⁽¹⁾

Application

Terminal No.

Volts in Park/Neutral

Volts in All Other Positions

NX & Sentra

6.0-7.0

⁽¹⁾	Turn ignition on. With transmission in specified position, check voltage between ground and indicated ECU terminal.