lemon-mirror:
Home >> Plymouth >> 2001 >> Prowler >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control System >> Spark Plug >> Installation

Spark Plug: Installation

  1. To avoid cross threading, start the spark plug into the cylinder head by hand.
  2. Tighten spark plugs to 28 N.m (20 ft. lbs.) torque.
  3. Install rubber boot onto ignition coil.
  4. Install ignition coil and boot onto spark plug.
  5. Install coil screws and tighten to 6.7 N.m (60 in. lbs.).
  6. Connect the electrical connector.
· About lemon-mirror