Removal & Installation
WARNING: This page is about the Trans Sport SE, 3.1 D, which is a different variant/trim than selected.
TRANS ID - 3T40
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
| w/Air Cond | | 10.0 | | C |
| w/o Air Cond | | 9.2 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | 0.2 | C |
| Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: CONVERTER SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | 0.2 | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 0.6 | 0.4 | C |
TRANS ID - 4T60E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
| | 7.0 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: CONVERTER SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 0.6 | | C |