Starter Motor: Removal
WARNING:
Before servicing any electrical component, the ignition key must be in the OFF or LOCK position and all electrical loads must be OFF, unless instructed otherwise in these procedures. If a tool or equipment could easily come in contact with a live exposed electrical terminal, also disconnect the negative battery cable. Failure to follow these precautions may cause personal injury and/or damage to the vehicle or its components.
- Disconnect the negative battery cable with the following procedures:
- Record all of the vehicle preset radio stations.
- Turn OFF all the lamps and the accessories.
- Make sure the ignition switch is in the OFF position.
- Disconnect the battery negative cable from the battery. See Fig 1.
- Raise and support the vehicle.
- Disconnect the electrical connectors from the starter. See Fig 2.
- Remove the starter bolts. See Fig 3.
- Remove the starter.