lemon-mirror:
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Accelerator Controls Cable Bracket Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Locating Accelerator Controls Cable
    GM12831Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator cable cross slug from the throttle body lever.
  2. Disconnect the accelerator cable from the accelerator cable bracket.
    3. Fig 2: Identifying Cruise Control Cable
    GM319387Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the cruise control cable from the throttle lever and accelerator bracket, if applicable.
    4. Fig 3: View Of Accelerator Bracket & Cable
    GM260171Courtesy of GENERAL MOTORS CORP.
  4. Remove the nut (3) and bolts (1, 2) holding the accelerator cable bracket to the throttle body.
  5. Remove the accelerator cable bracket.
· About lemon-mirror