lemon-mirror:
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
  2. Disconnect the intake air temperature (IAT) sensor electrical connector.
    3. Fig 1: Identifying Mass Air Flow (MAF) Sensor
    GM15974Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the mass air flow (MAF) sensor (1) electrical connector.
  4. Remove the air inlet duct from the MAF sensor and the throttle body.
  5. Remove the MAF sensor from the air filter housing.
· About lemon-mirror