Door Front, Central Locking System

• Removing and installing door
• Removing and installing inner door release (bowden cable) for door lock
• Removing and installing door handle
• Disassembling and assembling door
  • Notes
  • Disassembling door
  • Assembling door
• Adjustment instructions for assembly of the door
  • Diagram: sheetmetal clips and grommets
  • Basic setting of door lock
    • Notes
    • Basic setting of the door lock before installation
  • Standardising the system
    • Standardising the power windows
    • Blockage detection function
    • Precondition for operation of the power windows
  • Fitting the door window in the clamping jaws
  • Adjusting the door window angle in the vehicle's longitudinal direction
    • Driver
  • Adjusting the door window height
    • Notes
    • Adjustment procedure:
    • Checking the adjustment
  • Adjustment of the door window pressing force on the door seal at the top and sides
    • Notes
    • Adjustment procedure:
    • Checking the adjustment:
  • Adjusting the lower stop of the power window unit
• Disassembling and assembling door handle
• Setting the door