lemon-mirror:
Home >> Saturn >> 1996 >> SW1 Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Basic Ignition System Checks (C-4) >> Ignition Coil Resistance

Ignition Coil Resistance

  1. Disconnect ignition coil leads. Measure secondary coil resistance (secondary tower-to-secondary tower). Resistance should be 7000-10,000 ohms. If resistance is not within specification, replace ignition coil.
  2. Ignition coil primary resistance value is not available. If ignition coil is suspected of causing a misfire or a no-spark condition, switch coil locations on DIS module. If problem follows questionable coil, replace original coil.
· About lemon-mirror