lemon-mirror:
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Shift Lock Control Solenoid
    GM893824Courtesy of GENERAL MOTORS CORP.
  1. Route the shift lock control solenoid wires through the opening in the control assembly.
    2. Fig 2: Inserting Solenoid Electrical Terminals Into Connector Body
    GM893821Courtesy of GENERAL MOTORS CORP.
  2. Insert the wire terminals into the connector body.
    3. Fig 3: Attaching Shift Lock Control Solenoid With Rivet Gun
    GM893826Courtesy of GENERAL MOTORS CORP.
  3. Position the solenoid to the control assembly and install the solenoid pop rivet with a rivet gun.
  4. Install the automatic transaxle control assembly. Refer to Shift Control Replacement in Automatic Transaxle - 4T40-E/4T45-E.
  5. Enable the SIR system. Refer to SIR Disabling and Enabling Zones in SIR.
· About lemon-mirror