lemon-mirror:
Home >> Subaru >> 1982 >> GLF Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> NIPPONDENSO Electronic Ignition System >> Overhaul >> Disassembly

NIPPONDENSO Electronic Ignition System: Overhaul: Disassembly

  1. Remove distributor cap rotor, dust cover, and packing. Remove pick-up coil assembly, ignitor (Subaru only), vacuum advance mechanism, breaker plate and drive pinion.
  2. Remove 2 screws from bottom of distributor housing, and using a plastic hammer, carefully drive out shaft. Remove thick washer, bearing, thin washer, spring, and blue washer from shaft.
  3. Note location of thin and thick governor springs, and remove springs. Remove cam cap, signal rotor (reluctor), weight snap ring and weights.
· About lemon-mirror