lemon-mirror:
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Oil Pump Cover >> Removal

Oil Pump Cover: Removal

  1. Remove the transmission assembly from the vehicle. Refer to , REMOVAL , Automatic Transmission Assembly.
  2. Pull out the torque converter assembly. Refer to , REMOVAL , Torque Converter Assembly.
  3. Remove the transmission harness connector from stay.
  4. Remove the ATF cooler inlet pipe and outlet pipe. Refer to , REMOVAL , ATF Cooler Pipe and Hose.
  5. Separate the converter case and transmission case. Refer to , REMOVAL , Converter Case.
  6. Remove the oil pump cover mounting bolt, and then separate the oil pump cover from the AT main case by lightly tapping with plastic hammer.
    Fig 1: Locating Oil Pump Cover Mounting Bolts
    G05022338Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror