lemon-mirror:
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Transmission Control Module (TCM) >> Installation

Transmission Control Module (TCM): Installation

  1. Install the TCM to the bracket.
    CAUTION: Do not remove the TCM after installed to the bracket, or the bracket and TCM may be damaged. If installed by mistake, the part must be replaced with a new part.
  2. Install the TCM.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

    Fig 1: Identifying Transmission Control Module And Steering Column
    G07914791Courtesy of SUBARU OF AMERICA, INC.
  3. Connect the connector to TCM.
  4. Install the instrument panel lower cover. Refer to INSTRUMENT PANEL LOWER COVER .
  5. Perform Clear Memories 2 operation. Refer to CLEAR MEMORY MODE .
  6. Perform learning operation. Refer to LEARNING CONTROL .