lemon-mirror:
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Center Differential Carrier >> Installation

Center Differential Carrier: Installation

  1. Install the center differential assembly with the shim(s).
    NOTE: Press-fit it to the bottom of bearing shoulder completely.
    Fig 1: Identifying Center Differential Carrier Assembly
    G05022319Courtesy of SUBARU OF AMERICA, INC.
  2. Insert the rear drive shaft. Refer to INSTALLATION .
  3. Join the transmission case and the extension case, and then install the rear vehicle speed sensor. Refer to INSTALLATION .
  4. Install the transmission assembly to the vehicle. Refer to INSTALLATION .
· About lemon-mirror