lemon-mirror:
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Converter Case >> Removal

Converter Case: Removal

  1. Remove the transmission assembly from the vehicle. Refer to REMOVAL .
  2. Remove the torque converter assembly. Refer to REMOVAL .
  3. Remove the transmission harness connector from stay.
  4. Remove the turbine speed sensor 1. Refer to REMOVAL .
  5. Remove the air breather hose. Refer to REMOVAL .
  6. Remove the transmission hanger COMPL.
  7. Remove the ATF cooler inlet pipe and outlet pipe. Refer to REMOVAL .
  8. Remove the converter case attachment bolts.
  9. Lay along the transmission body, and then remove the oil pan.
  10. Remove the three converter case mounting bolts (TORX®).

    ST 18676AA020 TORX® WRENCH

    Fig 1: Removing Three Converter Case Mounting Bolts
    G05668863Courtesy of SUBARU OF AMERICA, INC.
  11. Separate the converter case by lightly tapping with plastic hammer.
  12. Remove the front differential assembly. Refer to REMOVAL .
  13. Remove the oil seal from converter case.
· About lemon-mirror