lemon-mirror:
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Oil Pump Cover >> Installation

Oil Pump Cover: Installation

  1. Secure the oil pump cover.
    NOTE: Use a new gasket.

    Tightening torque: 

    41 N.m (4.2 kgf-m, 30.2 ft-lb) 

    Fig 1: Identifying Oil Pump Cover
    G05022338Courtesy of SUBARU OF AMERICA, INC.
  2. Install the converter case assembly to the transmission case assembly. Refer to INSTALLATION .
  3. Install the transmission harness connector to the stay.
  4. Install the ATF cooler pipe. Refer to INSTALLATION .
  5. Install the torque converter assembly. Refer to INSTALLATION .
  6. Install the transmission assembly to the vehicle. Refer to INSTALLATION .
· About lemon-mirror