lemon-mirror:
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Oil Pump Cover >> Removal

Oil Pump Cover: Removal

  1. Remove the transmission assembly from the vehicle. Refer to REMOVAL .
  2. Pull out the torque converter assembly. Refer to REMOVAL .
  3. Remove the transmission harness connector from stay.
  4. Remove the ATF cooler inlet pipe and outlet pipe. Refer to REMOVAL .
  5. Separate the converter case and transmission case. Refer to REMOVAL .
  6. Remove the oil pump cover mounting bolt, and then separate the oil pump cover from the AT main case by lightly tapping with plastic hammer.
    Fig 1: Identifying Oil Pump Cover
    G05022338Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror