lemon-mirror:
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Rear Drive Shaft >> Removal

Rear Drive Shaft: Removal

  1. Remove the transmission assembly from the vehicle. Refer to REMOVAL .
  2. Remove the rear vehicle speed sensor, and then remove the extension case. Refer to REMOVAL .
  3. Pull out the rear drive shaft from center differential assembly.
    Fig 1: Identifying Reduction Drive Gear And Center Differential Assembly
    G05022299Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the drive plate and driven plate.
· About lemon-mirror