lemon-mirror:
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Turbine Speed Sensor 1 >> Removal

Turbine Speed Sensor 1: Removal

  1. Disconnect the ground cable from battery.
  2. Lift up the vehicle.
  3. Remove the front exhaust pipe. Refer to REMOVAL .
  4. Disconnect the turbine speed sensor 1 connector.
    Fig 1: Identifying Turbine Speed Sensor 1 Connector
    G06652012Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the turbine speed sensor 1.
· About lemon-mirror