lemon-mirror:
Home >> Subaru >> 2013 >> Tribeca >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System >> Knock Sensor >> Removal

Knock Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Remove the intake manifold. < Ref. to REMOVAL , Intake Manifold. >
  4. Disconnect the knock sensor connector.
  5. Remove the knock sensor from cylinder block.
    Fig 1: Identifying Knock Sensor
    G06651250Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror