lemon-mirror:
Home >> Subaru >> 2014 >> Tribeca >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Engine Control Module (ECM) >> Removal

Engine Control Module (ECM): Removal

  1. Disconnect the ground cable from battery.
  2. Remove the front pillar lower trim and console side panel lower RH of passenger's side.
  3. Detach the floor mat of passenger's seat.
  4. Remove the protect cover.
    Fig 1: Locating Protect Cover Mounting Screws
    G05016849Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the ECM from vehicle.
    Fig 2: Locating ECM Mounting Bolts
    G05031074Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror