Malfunction Indicator Light Does Not Go Off: Trouble Symptom
Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or generic scan tool display.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. | Is DTC of engine or LAN system displayed? Refer to OPERATION , Read Diagnostic Trouble Code (DTC). | Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) |
(DTC). > Go to step 2 |
| 2 CHECK COMBINATION METER. Perform the self-diagnosis for combination meter system. Refer to SELF-DIAGNOSIS , INSPECTION, Combination Meter System. | Does the malfunction indicator light illuminate and go off normally? | Replace the ECM. Refer to ENGINE CONTROL MODULE (ECM) | Replace the meter case assembly of combination meter. Refer to COMBINATION METER |