lemon-mirror:
Home >> Subaru >> 2014 >> Tribeca >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> AT Main Case >> Disassembly >> Input Clutch Pack Assembly

Input Clutch Pack Assembly

  1. Remove the front sun gear.
    Fig 1: Removing/Installing Front Sun Gear
    G05022424Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the thrust bearing.
  3. Remove the snap ring, and then remove the front carrier.
    Fig 2: Removing/Installing Front Carrier
    G05022425Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the input clutch assembly from rear internal gear.
    Fig 3: Removing/Installing Input Clutch Assembly From Rear Internal Gear
    G05022426Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror