lemon-mirror:
Home >> Subaru >> 2014 >> Tribeca >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Converter Case >> Removal

Converter Case: Removal

  1. Remove the transmission assembly from the vehicle. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Remove the torque converter assembly. < Ref. to REMOVAL , Torque Converter Assembly. >
  3. Remove the transmission harness connector from stay.
  4. Remove the turbine speed sensor 1. < Ref. to REMOVAL , Turbine Speed Sensor 1. >
  5. Remove the air breather hose. < Ref. to REMOVAL , Air Breather Hose. >
  6. Remove the oil charge pipe. < Ref. to REMOVAL , Oil Charge Pipe. >
  7. Remove the ATF AT inlet and outlet pipes. < Ref. to REMOVAL , ATF Cooler Pipe and Hose. >
  8. Remove the converter case attachment bolts.
  9. Lay along the transmission body, and then remove the oil pan.
  10. Remove the three converter case mounting bolts (TORX®).

    ST 18676AA020 TORX® WRENCH

    Fig 1: Removing Converter Case Mounting Bolts Using Torx Wrench
    G05668863Courtesy of SUBARU OF AMERICA, INC.
  11. Separate the converter case by lightly tapping with plastic hammer.
  12. Remove the front differential assembly. < Ref. to REMOVAL , Front Differential Assembly. >
  13. Remove the oil seal from converter case.
· About lemon-mirror