lemon-mirror:
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System (Induction) >> Collector Cover >> Installation

Collector Cover: Installation

  1. Install the collector cover bracket.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  2. Install the collector cover in the order shown in the figure.
    CAUTION: The operation must be carefully performed; otherwise the collector cover may be damaged.
    NOTE: Check the cushion (a) and cushion (b) for disengagement or peel-off.
    G13224189Courtesy of SUBARU OF AMERICA, INC.
    1. Insert the bracket insertion part at the collector cover backside into the collector cover bracket (A).
    2. Install the collector cover by inserting the protrusion at the collector cover backside into the cushion (B).
      G13224193Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror