Draining Fuel (With Other Than Subaru Select Monitor)

WARNING: Place "NO OPEN FLAMES" signs near the working area.

CAUTION: Be careful not to spill fuel.

NOTE: If the fuel gauge indicates "F", perform "DRAINING FUEL PARTIALLY".
Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>FUEL>PROCEDURE>DRAINING FUEL PARTIALLY .

Open the fuel filler lid and remove the fuel filler cap.
Remove the fuel pump assembly.
Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>FUEL PUMP>REMOVAL .
Remove the fuel sub level sensor.
Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>FUEL SUB LEVEL SENSOR>REMOVAL .
Drain the fuel from the fuel tank using the gasoline proof pump.
CAUTION:
- Be careful not to spill fuel.
- Always collect fuel using a dedicated fuel container.
Install the related parts in the reverse order after draining the fuel.
NOTE: For information about connecting the quick connector on the fuel delivery tube:
Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE D) .