lemon-mirror:
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Rear Exhaust Pipe >> Installation

Rear Exhaust Pipe: Installation

  1. Install the center exhaust cover.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb)

  2. Apply a coat of spray type lubricant to the mating area of cushion rubber, and install the rear exhaust pipe.
    NOTE: After installation, degrease the cushion rubber.
  3. Set a new gasket, and connect the center exhaust pipe (rear) and the rear exhaust pipe.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb)

  4. Install the muffler. Ref. to EXHAUST (H4DOTC)>Muffler>INSTALLATION .
· About lemon-mirror