lemon-mirror:
Home >> Subaru >> 2022 >> Forester Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Crankshaft Position Sensor >> Installation

Crankshaft Position Sensor: Installation

  1. Install the crankshaft position sensor and connect the connector.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  2. Install the engine ground and the harness case.

    Tightening torque: 

    19 N.m (1.9 kgf-m, 14.0 ft-lb)

  3. Install the clip (B) to the engine wiring harness bracket.
  4. Connect the connector (A).
    G13223951Courtesy of SUBARU OF AMERICA, INC.
  5. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO)>AIR INTAKE BOOT>INSTALLATION .
  6. Install the collector cover. Ref. to INTAKE (INDUCTION) (H4DO)>COLLECTOR COVER>INSTALLATION .
  7. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
· About lemon-mirror