lemon-mirror:
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Engine Control Module (ECM) Removal and Installation >> Removal

Engine Control Module (ECM) Removal and Installation: Removal

  1. Disconnect negative cable at battery.
  2. Remove ECM cover.
  3. Disconnect connectors from ECM as follows.
    1. Push lock (1) to release locking of lock lever (2).
    2. Turn lock lever to arrow direction until it stops.
      Fig 1: Pushing Lock To Release Locking Of Lock Lever
      G04846696Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove ECM (1) from its bracket by removing its mounting bolts (2).
    Fig 2: Identifying ECM
    G04846697Courtesy of SUZUKI OF AMERICA CORP.
· About lemon-mirror